Loading Precision .338 with Triebel Dies
It’s incredibly rewarding to build a rifle, load the ammo for it, and shoot it to measure the results. I decided to take out the .338 Lapua Freedom Rifle and do some load development with it....
View Article.300 Blackout Issue Solved: Sheridan Engineering Gauge
Using the correct case gauge can save a lot of time and prevent considerable headaches. Sheridan Engineering’s slotted gauge helped me solve a problem I was having with .300 Blackout. Disclaimer...
View ArticleTESTED: Ramshot Hunter, Versatile Rifle Powder
I’ve had great success with Ramshot’s Hunter Powder. It has been around for some time, and it still holds up! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article...
View ArticleNew Brass Seating Force Test
Recently we highlighted the Infinity APS die from Short Action Customs. Today we’re using it in the AMP Press to explore how bullet seating forces vary with different types of brass. Disclaimer...
View ArticleHawkins Heavy Tactical One-Piece Scope Mount
I took the opportunity to test the Hawkins Precision Heavy Tactical one-piece mount on the 7mm PRC Freedom Rifle. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this...
View Article7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this...
View ArticleInside Look: Colorado School of Trades Facilities Tour
We’ve given an overview of the Colorado School of Trades and inside look at its programs. I recently traveled to Colorado and received an in-depth tour! Disclaimer Ultimate Reloader LLC / Making with...
View ArticlePSA AK-47 Overview
I love the AK platform. It’s a lot different from the precision bolt guns you typically see on the channel, but is still a source of great enjoyment. I’ll be doing a Boyds hardwood stock upgrade, just...
View Article7 PRCW Build Part 2: EC Tuner V2 Machining/Install
I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2! *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC...
View Article5 Ways to Get on Target with Piet Malan
Piet Malan of Impact Shooting had quite the performance at the 2023 Rock Chuck Olympics. I took some time during the event to ask him about ways to get on and stay on target. Disclaimer Ultimate...
View ArticleWinningest Stock in PRS Revealed
We’ve previously highlighted two Foundation Stocks: the Genesis 2 and Dominion. They have quickly become a favorite, especially the Dominion on our .308 Shorty rifle build. We aren’t the only ones who...
View ArticleUltradyne UD Launch Pad Overview
There are times you need to steady your rifle as much as possible. Ultradyne offers a unique alternative to a traditional rest with the UD Launch Pad! Disclaimer Ultimate Reloader LLC / Making with...
View ArticleNEW: Bergara B-14 Squared Crest 7mm PRC
Earlier this year, I showed the Bergara B-14 Squared Crest in .308 Winchester. You all asked for 7mm PRC — here it is! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this...
View ArticleLeupold Mark 5HD 5-25×56 Scope
We’ve covered the Leupold Mark 5HD 7-35×56 and the Mark 5HD 2-10×30. This time we’re looking at the Leupold Mark 5HD 5-25×56 we tested on the new 7mm PRC Bergara B-14 Squared Crest! Disclaimer Ultimate...
View ArticleBoyds AK-47 Furniture Upgrade
I previously gave a brief overview of my Palmetto State AK in preparation for a Boyds upgrade, similar to one I did with an AR-15. Now, it’s finished! Disclaimer Ultimate Reloader LLC / Making with...
View ArticleTESTED: Athlon Argos BTR 8-34×56 Gen 2 Scope
The Athlon Argos BTR Gen 2 8-34×56 recently topped our Boyds Pro Varmint Stock .22-250 upgrade. This time, we’re taking an in-depth look at the optic. Disclaimer Ultimate Reloader LLC / Making with...
View ArticleTop Three Budget Hunting Rifles with Who-Tee-Who
Adam Wies, Mr. Who-Tee-Who, competed in the 2023 Rock Chuck Olympics and earned the Bronze Rock Chuck award. While in Washington, we talked budget rifles! Disclaimer Ultimate Reloader LLC / Making...
View ArticleSetting Up the Precision Matthews PM-1440HVT-2 Lathe
Manual machinery has always interested me. I’ve used the Precision Matthews PM-949TV Precision Mill, PM-1440GT, and TL-1660 on a variety of projects and they’ve served me well. While I still use these...
View ArticleFinally – Guy Miner Hunts with a 6.5 Creedmoor!
You all know how much I love the .30-06. Thanks to Gavin, I have the opportunity to work with a new rifle, new scope, and a cartridge that’s new to me! That’s a lot of “new” for me to deal with, but I...
View ArticleNew Ultimate Reloader Video Studio
Precision Rifle Concepts is expanding! We now have a full studio within the gunsmithing business and three times the space! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading...
View Article